Kannel - Error in AT+CNMI command

Wed Jun 20 19:17:54 CEST 2007

Hi Reflejo,

Thanx for pointing out my mistake.
I really could not get mail id for user related questions.
Now onwards I will mail to user related mailing list only.

Regards,
Bhagwandas

On 6/17/07, Reflejo <reflejo at gmail.com> wrote:
>
> I'm just curious. Why do you send a USER-RELATED question to
> COMMERCIAL at kannel.com?.
>
> Please, please, for that purpose use users at kannel.org
>
> Martin.
>
> On 6/17/07, Bhagwandas Paliwal <bhagwandas at gmail.com> wrote:
>
> > Hi All,
> >
> > We are using Kannel 1.4.1 with Nokia 5300 (connected using USB cable).
> > Nokia 5300 is set to Nokia mode (out of 3 modes given - Nokia Mode,
> > Printing and Media Mode and Data Mode).
> > When bearerebox is started, it gives error while executing one of the AT
> > command i.e AT+CNMI=1,2,0,1,0
> > We tried executing AT commands using minicom but still we were getting
> > same problem.
> > Can anybody please suggest solution to this problem?
> > Right now, we have just guessed the values for detect-string so if there
> > is any AT command to figure out these values or real values, do let us know.
> >
> >
> > Please find smskannle.conf and error log below:
> >
> > In smskannel.conf, here is the configuration of relevant portion (modem
> > and smsc part).
> >
> > #---------------------------------------------
> > # SMSC CONNECTIONS
> > #
> > # SMSC connections are created in bearerbox and they handle SMSC
> > specific
> > # protocol and message relying. You need these to actually receive and
> > send
> > # messages to handset, but can use GSM modems as virtual SMSCs
> >
> >
> > # This is a fake smsc connection, _only_ used to test the system and
> > services.
> > # It really cannot relay messages to actual handsets!
> >
> > # group = smsc
> > # smsc = fake
> > # smsc-id = FAKE
> > # port = 10000
> > # connect-allow-ip = 127.0.0.1
> >
> > group = smsc
> > smsc = at
> > modemtype = Nokia
> > my-number = 919844142580
> > #device = /dev/ttyS0
> > device = /dev/ttyACM0
> > speed = 19200
> >
> > #
> > ------------------------------------------------------------------------------
> > # modem definitions
> > #
> > ------------------------------------------------------------------------------
> >
> > group = modems
> > id = Nokia
> > name = Nokia
> > #detect-string = "Nokia"
> > #init-string=ATE0
> > detect-string = "5300"
> > detect-string2 = "NOKIA"
> > message-storage = "SM"
> > #need-sleep = true
> >
> > Please find full smskannel.conf at bottom of message.
> >
> > Here is the error we are getting when we run bearerbox.
> >
> > 2007-06-17 21:40:09 [11275] [0] INFO: Debug_lvl = 0, log_file = <none>,
> > log_lvl = 0
> > 2007-06-17 21:40:09 [11275] [0] WARNING: DLR: using default 'internal'
> > for storage type.
> > 2007-06-17 21:40:09 [11275] [0] INFO: DLR using storage type: internal
> > 2007-06-17 21:40:09 [11275] [0] DEBUG: Kannel bearerbox version `1.4.1'.
> > Build `Jun 12 2007 00:33:20', compiler `3.4.6 20060404 (Red Hat 3.4.6-3
> > )'.
> > System Linux, release 2.6.9-42.EL, version #1 Sat Aug 12 09:17:58 CDT
> > 2006, machine i686.
> > Hostname localhost.localdomain, IP 127.0.0.1.
> > Libxml version 2.6.16.
> > Using OpenSSL 0.9.7a Feb 19 2003.
> > Using native malloc.
> >
> > 2007-06-17 21:40:09 [11275] [0] INFO: Added logfile `/root/kannel.log'
> > with level `0'.
> > 2007-06-17 21:40:09 [11275] [0] INFO: HTTP: Opening server at port
> > 13000.
> > 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 1
> > (gwlib/fdset.c:poller)
> > 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 2
> > (gwlib/http.c:server_thread)
> > 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 3
> > (gw/bb_http.c:httpadmin_run)
> > 2007-06-17 21:40:09 [11275] [0] DEBUG: starting smsbox connection module
> > 2007-06-17 21:40:09 [11275] [0] INFO: BOXC: 'smsbox-max-pending' not
> > set, using default (100).
> > 2007-06-17 21:40:09 [11275] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
> > maps to pid 11275.
> > 2007-06-17 21:40:09 [11275] [2] DEBUG: Thread 2
> > (gwlib/http.c:server_thread) maps to pid 11275.
> > 2007-06-17 21:40:09 [11275] [3] DEBUG: Thread 3
> > (gw/bb_http.c:httpadmin_run) maps to pid 11275.
> > 2007-06-17 21:40:09 [11275] [4] DEBUG: Thread 4
> > (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 11275.
> > 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 4
> > (gw/bb_boxc.c:sms_to_smsboxes)
> > 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 5
> > (gw/bb_boxc.c:smsboxc_run)
> > 2007-06-17 21:40:09 [11275] [0] INFO: Set SMS resend frequency to 60
> > seconds.
> > 2007-06-17 21:40:10 [11275] [0] INFO: SMS resend retry set to unlimited.
> > 2007-06-17 21:40:10 [11275] [0] INFO: DLR rerouting for smsc id <(null)>
> > disabled.
> > 2007-06-17 21:40:10 [11275] [0] INFO: AT2[/dev/ttyACM0]: configuration
> > shows modemtype <Nokia>
> > 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Reading modem
> > definitions from <../smskannel.conf>
> > 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Found <1>
> > modems in config
> > 2007-06-17 21:40:10 [11275] [5] DEBUG: Thread 5
> > (gw/bb_boxc.c:smsboxc_run) maps to pid 11275.
> > 2007-06-17 21:40:10 [11275] [0] INFO: AT2[/dev/ttyACM0]: read modem
> > definition for <Nokia>
> > 2007-06-17 21:40:10 [11275] [0] DEBUG: Started thread 6
> > (gw/smsc/smsc_at.c:at2_device_thread)
> > 2007-06-17 21:40:10 [11275] [0] DEBUG: Started thread 7
> > (gw/bb_smscconn.c:sms_router)
> > 2007-06-17 21:40:10 [11275] [0] INFO:
> > ----------------------------------------
> > 2007-06-17 21:40:10 [11275] [0] INFO: Kannel bearerbox II version 1.4.1starting
> > 2007-06-17 21:40:10 [11275] [0] INFO: MAIN: Start-up done, entering
> > mainloop
> > 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: start called
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: Thread 6
> > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 11275.
> > 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: opening device
> > 2007-06-17 21:40:10 [11275] [7] DEBUG: Thread 7
> > (gw/bb_smscconn.c:sms_router) maps to pid 11275.
> > 2007-06-17 21:40:10 [11275] [7] DEBUG: sms_router: time to sleep 30.00secs.
> > 2007-06-17 21:40:10 [11275] [7] DEBUG: sms_router: gwlist_len = 0
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> > 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: init device
> > 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: speed set to
> > 19200
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATZ
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> > AT+IFC=2,2^M
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CPIN?^M
> >
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CPIN:
> > READY
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> > AT+CMGF=0^M
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> > AT+CSMS=?^M
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0)
> >
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> > AT+CNMI=1,2,0,1,0^M
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR
> > 2007-06-17 21:40:11 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Generic error:
> > ERROR
> > 2007-06-17 21:40:11 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Opening
> > failed. Terminating
> > 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device
> > 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: opening device
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> > 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: init device
> > 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: speed set to
> > 19200
> > 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M
> > 2007-06-17 21:40:14 [11275] [0] WARNING: Killing signal or HTTP admin
> > command received, shutting down...
> > 2007-06-17 21:40:14 [11275] [0] DEBUG: Shutting down Kannel...
> > 2007-06-17 21:40:14 [11275] [0] DEBUG: shutting down smsc
> > 2007-06-17 21:40:14 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Shutting down
> > SMSCConn, slow
> > 2007-06-17 21:40:14 [11275] [0] DEBUG: shutting down udp
> > 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Wrong or no
> > answer to ATZ, ignoring
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> > AT+IFC=2,2^M
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CPIN?^M
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CPIN:
> > READY
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> > AT+CMGF=0^M
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> > AT+CSMS=?^M
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0)
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> > AT+CNMI=1,2,0,1,0^M
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR
> > 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Generic error:
> > ERROR
> > 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Opening
> > failed. Terminating
> > 2007-06-17 21:40:15 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device
> > 2007-06-17 21:40:15 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device
> > 2007-06-17 21:40:15 [11275] [6] DEBUG: Thread 6
> > (gw/smsc/smsc_at.c:at2_device_thread) terminates.
> > 2007-06-17 21:40:15 [11275] [7] DEBUG: Thread 7
> > (gw/bb_smscconn.c:sms_router) terminates.
> > 2007-06-17 21:40:15 [11275] [4] DEBUG: Thread 4
> > (gw/bb_boxc.c:sms_to_smsboxes) terminates.
> > 2007-06-17 21:40:15 [11275] [5] DEBUG: Thread 5
> > (gw/bb_boxc.c:smsboxc_run) terminates.
> > 2007-06-17 21:40:15 [11275] [0] INFO: All flow threads have died,
> > killing core
> > 2007-06-17 21:40:15 [11275] [0] DEBUG: Waiting for 2
> > (gwlib/http.c:server_thread) to terminate
> > 2007-06-17 21:40:15 [11275] [3] DEBUG: HTTP: No clients with requests,
> > quitting.
> > 2007-06-17 21:40:15 [11275] [3] DEBUG: Thread 3
> > (gw/bb_http.c:httpadmin_run) terminates.
> > 2007-06-17 21:40:15 [11275] [2] DEBUG: Thread 2
> > (gwlib/http.c:server_thread) terminates.
> > 2007-06-17 21:40:16 [11275] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
> > terminates.
> > 2007-06-17 21:40:16 [11275] [0] INFO: Total WDP messages: received 0,
> > sent 0
> > 2007-06-17 21:40:16 [11275] [0] INFO: Total SMS messages: received 0,
> > sent 0
> > 2007-06-17 21:40:16 [11275] [0] DEBUG: Immutable octet strings: 210.
> >
> > --
> > Regards
> > Bhagwandas Paliwal
> > ------------------------------------------------------------
> > Kannel: Open Source WAP and SMS gateway
> > commercial mailing list
> > commercial at kannel.org
> >
> > NONE OF THE INCLUDED COMMERCIAL OFFERINGS WIHTIN THIS TRANSMITTED
> > INFORMATION IS RELATED TO THE KANNEL GROUP OR THE KANNEL SOFTWARE
> > FOUNDATION. THE SENDER IS RESPONSIBLE FOR THE OFFERING STATEMENTS WITHIN.
> >
> > The information transmitted may be intended only for the person or
> > entity to which it is addressed and may contain confidential and/or
> > privileged material. The Kannel Group nor The Kannel Software Foundation are
> > responsible in any way or form if this information is transmitted to any non
> > inteded recipient. Any review, retransmission, dissemination or other use
> > of, or taking of any action in reliance upon, this information by persons or
> > entities other than the intended recipient may be unintentional and the
> > sender is fully reponsible for this. If you receive this in error, please
> > contact the sender. Any views or opinions presented are solely those of the
> > authors and do not necessarily represent those of The Kannel Group nor The
> > Kannel Software Foundation.
> > ------------------------------------------------------------
>
>

-- 
Regards
Bhagwandas Paliwal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.kannel.org/pipermail/commercial/attachments/20070620/6b4d34b6/attachment-0001.html 