Kannel - Error in AT+CNMI command

Sun Jun 17 19:05:17 CEST 2007

I'm just curious. Why do you send a USER-RELATED question to
COMMERCIAL at kannel.com?.

Please, please, for that purpose use users at kannel.org

Martin.

On 6/17/07, Bhagwandas Paliwal <bhagwandas at gmail.com> wrote:
>
> Hi All,
>
> We are using Kannel 1.4.1 with Nokia 5300 (connected using USB cable).
> Nokia 5300 is set to Nokia mode (out of 3 modes given - Nokia Mode,
> Printing and Media Mode and Data Mode).
> When bearerebox is started, it gives error while executing one of the AT
> command i.e AT+CNMI=1,2,0,1,0
> We tried executing AT commands using minicom but still we were getting
> same problem.
> Can anybody please suggest solution to this problem?
> Right now, we have just guessed the values for detect-string so if there
> is any AT command to figure out these values or real values, do let us know.
>
>
> Please find smskannle.conf and error log below:
>
> In smskannel.conf, here is the configuration of relevant portion (modem
> and smsc part).
>
> #---------------------------------------------
> # SMSC CONNECTIONS
> #
> # SMSC connections are created in bearerbox and they handle SMSC specific
> # protocol and message relying. You need these to actually receive and
> send
> # messages to handset, but can use GSM modems as virtual SMSCs
>
>
> # This is a fake smsc connection, _only_ used to test the system and
> services.
> # It really cannot relay messages to actual handsets!
>
> # group = smsc
> # smsc = fake
> # smsc-id = FAKE
> # port = 10000
> # connect-allow-ip = 127.0.0.1
>
> group = smsc
> smsc = at
> modemtype = Nokia
> my-number = 919844142580
> #device = /dev/ttyS0
> device = /dev/ttyACM0
> speed = 19200
>
> #
> ------------------------------------------------------------------------------
> # modem definitions
> #
> ------------------------------------------------------------------------------
>
> group = modems
> id = Nokia
> name = Nokia
> #detect-string = "Nokia"
> #init-string=ATE0
> detect-string = "5300"
> detect-string2 = "NOKIA"
> message-storage = "SM"
> #need-sleep = true
>
> Please find full smskannel.conf at bottom of message.
>
> Here is the error we are getting when we run bearerbox.
>
> 2007-06-17 21:40:09 [11275] [0] INFO: Debug_lvl = 0, log_file = <none>,
> log_lvl = 0
> 2007-06-17 21:40:09 [11275] [0] WARNING: DLR: using default 'internal' for
> storage type.
> 2007-06-17 21:40:09 [11275] [0] INFO: DLR using storage type: internal
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Kannel bearerbox version `1.4.1'.
> Build `Jun 12 2007 00:33:20', compiler `3.4.6 20060404 (Red Hat 3.4.6-3)'.
> System Linux, release 2.6.9-42.EL, version #1 Sat Aug 12 09:17:58 CDT
> 2006, machine i686.
> Hostname localhost.localdomain, IP 127.0.0.1.
> Libxml version 2.6.16.
> Using OpenSSL 0.9.7a Feb 19 2003.
> Using native malloc.
>
> 2007-06-17 21:40:09 [11275] [0] INFO: Added logfile `/root/kannel.log'
> with level `0'.
> 2007-06-17 21:40:09 [11275] [0] INFO: HTTP: Opening server at port 13000.
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 1
> (gwlib/fdset.c:poller)
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 2
> (gwlib/http.c:server_thread)
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 3
> (gw/bb_http.c:httpadmin_run)
> 2007-06-17 21:40:09 [11275] [0] DEBUG: starting smsbox connection module
> 2007-06-17 21:40:09 [11275] [0] INFO: BOXC: 'smsbox-max-pending' not set,
> using default (100).
> 2007-06-17 21:40:09 [11275] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
> maps to pid 11275.
> 2007-06-17 21:40:09 [11275] [2] DEBUG: Thread 2
> (gwlib/http.c:server_thread) maps to pid 11275.
> 2007-06-17 21:40:09 [11275] [3] DEBUG: Thread 3
> (gw/bb_http.c:httpadmin_run) maps to pid 11275.
> 2007-06-17 21:40:09 [11275] [4] DEBUG: Thread 4
> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 11275.
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 4
> (gw/bb_boxc.c:sms_to_smsboxes)
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 5
> (gw/bb_boxc.c:smsboxc_run)
> 2007-06-17 21:40:09 [11275] [0] INFO: Set SMS resend frequency to 60
> seconds.
> 2007-06-17 21:40:10 [11275] [0] INFO: SMS resend retry set to unlimited.
> 2007-06-17 21:40:10 [11275] [0] INFO: DLR rerouting for smsc id <(null)>
> disabled.
> 2007-06-17 21:40:10 [11275] [0] INFO: AT2[/dev/ttyACM0]: configuration
> shows modemtype <Nokia>
> 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Reading modem
> definitions from <../smskannel.conf>
> 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Found <1> modems
> in config
> 2007-06-17 21:40:10 [11275] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run)
> maps to pid 11275.
> 2007-06-17 21:40:10 [11275] [0] INFO: AT2[/dev/ttyACM0]: read modem
> definition for <Nokia>
> 2007-06-17 21:40:10 [11275] [0] DEBUG: Started thread 6
> (gw/smsc/smsc_at.c:at2_device_thread)
> 2007-06-17 21:40:10 [11275] [0] DEBUG: Started thread 7
> (gw/bb_smscconn.c:sms_router)
> 2007-06-17 21:40:10 [11275] [0] INFO:
> ----------------------------------------
> 2007-06-17 21:40:10 [11275] [0] INFO: Kannel bearerbox II version 1.4.1starting
> 2007-06-17 21:40:10 [11275] [0] INFO: MAIN: Start-up done, entering
> mainloop
> 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: start called
> 2007-06-17 21:40:10 [11275] [6] DEBUG: Thread 6
> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 11275.
> 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: opening device
> 2007-06-17 21:40:10 [11275] [7] DEBUG: Thread 7
> (gw/bb_smscconn.c:sms_router) maps to pid 11275.
> 2007-06-17 21:40:10 [11275] [7] DEBUG: sms_router: time to sleep 30.00secs.
> 2007-06-17 21:40:10 [11275] [7] DEBUG: sms_router: gwlist_len = 0
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: init device
> 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: speed set to
> 19200
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATZ
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CPIN?^M
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CPIN: READY
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0)
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> AT+CNMI=1,2,0,1,0^M
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR
> 2007-06-17 21:40:11 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Generic error:
> ERROR
> 2007-06-17 21:40:11 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Opening failed.
> Terminating
> 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device
> 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: opening device
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: init device
> 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: speed set to
> 19200
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M
> 2007-06-17 21:40:14 [11275] [0] WARNING: Killing signal or HTTP admin
> command received, shutting down...
> 2007-06-17 21:40:14 [11275] [0] DEBUG: Shutting down Kannel...
> 2007-06-17 21:40:14 [11275] [0] DEBUG: shutting down smsc
> 2007-06-17 21:40:14 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Shutting down
> SMSCConn, slow
> 2007-06-17 21:40:14 [11275] [0] DEBUG: shutting down udp
> 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Wrong or no
> answer to ATZ, ignoring
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M
>
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CPIN?^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CPIN: READY
>
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0)
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> AT+CNMI=1,2,0,1,0^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR
> 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Generic error:
> ERROR
> 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Opening failed.
> Terminating
> 2007-06-17 21:40:15 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device
> 2007-06-17 21:40:15 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device
> 2007-06-17 21:40:15 [11275] [6] DEBUG: Thread 6
> (gw/smsc/smsc_at.c:at2_device_thread) terminates.
> 2007-06-17 21:40:15 [11275] [7] DEBUG: Thread 7
> (gw/bb_smscconn.c:sms_router) terminates.
> 2007-06-17 21:40:15 [11275] [4] DEBUG: Thread 4
> (gw/bb_boxc.c:sms_to_smsboxes) terminates.
> 2007-06-17 21:40:15 [11275] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run)
> terminates.
> 2007-06-17 21:40:15 [11275] [0] INFO: All flow threads have died, killing
> core
> 2007-06-17 21:40:15 [11275] [0] DEBUG: Waiting for 2
> (gwlib/http.c:server_thread) to terminate
> 2007-06-17 21:40:15 [11275] [3] DEBUG: HTTP: No clients with requests,
> quitting.
> 2007-06-17 21:40:15 [11275] [3] DEBUG: Thread 3
> (gw/bb_http.c:httpadmin_run) terminates.
> 2007-06-17 21:40:15 [11275] [2] DEBUG: Thread 2
> (gwlib/http.c:server_thread) terminates.
> 2007-06-17 21:40:16 [11275] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
> terminates.
> 2007-06-17 21:40:16 [11275] [0] INFO: Total WDP messages: received 0, sent
> 0
> 2007-06-17 21:40:16 [11275] [0] INFO: Total SMS messages: received 0, sent
> 0
> 2007-06-17 21:40:16 [11275] [0] DEBUG: Immutable octet strings: 210.
>
> --
> Regards
> Bhagwandas Paliwal
> ------------------------------------------------------------
> Kannel: Open Source WAP and SMS gateway
> commercial mailing list
> commercial at kannel.org
>
> NONE OF THE INCLUDED COMMERCIAL OFFERINGS WIHTIN THIS TRANSMITTED
> INFORMATION IS RELATED TO THE KANNEL GROUP OR THE KANNEL SOFTWARE
> FOUNDATION. THE SENDER IS RESPONSIBLE FOR THE OFFERING STATEMENTS WITHIN.
>
> The information transmitted may be intended only for the person or entity
> to which it is addressed and may contain confidential and/or privileged
> material. The Kannel Group nor The Kannel Software Foundation are
> responsible in any way or form if this information is transmitted to any non
> inteded recipient. Any review, retransmission, dissemination or other use
> of, or taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient may be unintentional and the
> sender is fully reponsible for this. If you receive this in error, please
> contact the sender. Any views or opinions presented are solely those of the
> authors and do not necessarily represent those of The Kannel Group nor The
> Kannel Software Foundation.
> ------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.kannel.org/pipermail/commercial/attachments/20070617/0db4df5f/attachment-0001.html 