commercial Digest, Vol 3, Issue 3

[seik]

try with different baudrates
for example siemens 35i chip on usb works great on 115200 ...
i dont like nokia chips at all

cheers




-----Original Message-----
From: commercial-request at kannel.org [commercial-request at kannel.org]
Sent: 17 Юни 2007 г.
To: seik
Subject:commercial Digest, Vol 3, Issue 3 

> Send commercial mailing list submissions to
>         commercial at kannel.org

> To subscribe or unsubscribe via the World Wide Web, visit
>         http://www.kannel.org/mailman/listinfo/commercial
> or, via email, send a message with subject or body 'help' to
>         commercial-request at kannel.org

> You can reach the person managing the list at
>         commercial-owner at kannel.org

> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of commercial digest..."


> Today's Topics:

>    1. Kannel - Error in AT+CNMI command (Bhagwandas Paliwal)
>    2. Re: Kannel - Error in AT+CNMI command (Reflejo)


> ----------------------------------------------------------------------

> Message: 1
> Date: Sun, 17 Jun 2007 21:48:17 +0530
> From: "Bhagwandas Paliwal" <bhagwandas at gmail.com>
> Subject: Kannel - Error in AT+CNMI command
> To: commercial at kannel.org
> Message-ID:
>         <ce79fc8f0706170918r657898acq466ce09a2cec3d1a at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"

> Hi All,

> We are using Kannel 1.4.1 with Nokia 5300 (connected using USB cable).
> Nokia 5300 is set to Nokia mode (out of 3 modes given - Nokia Mode, Printing
> and Media Mode and Data Mode).
> When bearerebox is started, it gives error while executing one of the AT
> command i.e AT+CNMI=1,2,0,1,0
> We tried executing AT commands using minicom but still we were getting same
> problem.
> Can anybody please suggest solution to this problem?
> Right now, we have just guessed the values for detect-string so if there is
> any AT command to figure out these values or real values, do let us know.

> Please find smskannle.conf and error log below:

> In smskannel.conf, here is the configuration of relevant portion (modem and
> smsc part).

> #---------------------------------------------
> # SMSC CONNECTIONS
> #
> # SMSC connections are created in bearerbox and they handle SMSC specific
> # protocol and message relying. You need these to actually receive and send
> # messages to handset, but can use GSM modems as virtual SMSCs


> # This is a fake smsc connection, _only_ used to test the system and
> services.
> # It really cannot relay messages to actual handsets!

> # group = smsc
> # smsc = fake
> # smsc-id = FAKE
> # port = 10000
> # connect-allow-ip = 127.0.0.1

> group = smsc
> smsc = at
> modemtype = Nokia
> my-number = 919844142580
> #device = /dev/ttyS0
> device = /dev/ttyACM0
> speed = 19200

> #
> ------------------------------------------------------------------------------
> # modem definitions
> #
> ------------------------------------------------------------------------------

> group = modems
> id = Nokia
> name = Nokia
> #detect-string = "Nokia"
> #init-string=ATE0
> detect-string = "5300"
> detect-string2 = "NOKIA"
> message-storage = "SM"
> #need-sleep = true

> Please find full smskannel.conf at bottom of message.

> Here is the error we are getting when we run bearerbox.

> 2007-06-17 21:40:09 [11275] [0] INFO: Debug_lvl = 0, log_file = <none>,
> log_lvl = 0
> 2007-06-17 21:40:09 [11275] [0] WARNING: DLR: using default 'internal' for
> storage type.
> 2007-06-17 21:40:09 [11275] [0] INFO: DLR using storage type: internal
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Kannel bearerbox version `1.4.1'.
> Build `Jun 12 2007 00:33:20', compiler `3.4.6 20060404 (Red Hat 3.4.6-3)'.
> System Linux, release 2.6.9-42.EL, version #1 Sat Aug 12 09:17:58 CDT 2006,
> machine i686.
> Hostname localhost.localdomain, IP 127.0.0.1.
> Libxml version 2.6.16.
> Using OpenSSL 0.9.7a Feb 19 2003.
> Using native malloc.

> 2007-06-17 21:40:09 [11275] [0] INFO: Added logfile `/root/kannel.log' with
> level `0'.
> 2007-06-17 21:40:09 [11275] [0] INFO: HTTP: Opening server at port 13000.
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 1
> (gwlib/fdset.c:poller)
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 2
> (gwlib/http.c:server_thread)
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 3
> (gw/bb_http.c:httpadmin_run)
> 2007-06-17 21:40:09 [11275] [0] DEBUG: starting smsbox connection module
> 2007-06-17 21:40:09 [11275] [0] INFO: BOXC: 'smsbox-max-pending' not set,
> using default (100).
> 2007-06-17 21:40:09 [11275] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps
> to pid 11275.
> 2007-06-17 21:40:09 [11275] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread)
> maps to pid 11275.
> 2007-06-17 21:40:09 [11275] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run)
> maps to pid 11275.
> 2007-06-17 21:40:09 [11275] [4] DEBUG: Thread 4
> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 11275.
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 4
> (gw/bb_boxc.c:sms_to_smsboxes)
> 2007-06-17 21:40:09 [11275] [0] DEBUG: Started thread 5
> (gw/bb_boxc.c:smsboxc_run)
> 2007-06-17 21:40:09 [11275] [0] INFO: Set SMS resend frequency to 60
> seconds.
> 2007-06-17 21:40:10 [11275] [0] INFO: SMS resend retry set to unlimited.
> 2007-06-17 21:40:10 [11275] [0] INFO: DLR rerouting for smsc id <(null)>
> disabled.
> 2007-06-17 21:40:10 [11275] [0] INFO: AT2[/dev/ttyACM0]: configuration shows
> modemtype <Nokia>
> 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Reading modem
> definitions from <../smskannel.conf>
> 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Found <1> modems
> in config
> 2007-06-17 21:40:10 [11275] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run)
> maps to pid 11275.
> 2007-06-17 21:40:10 [11275] [0] INFO: AT2[/dev/ttyACM0]: read modem
> definition for <Nokia>
> 2007-06-17 21:40:10 [11275] [0] DEBUG: Started thread 6
> (gw/smsc/smsc_at.c:at2_device_thread)
> 2007-06-17 21:40:10 [11275] [0] DEBUG: Started thread 7
> (gw/bb_smscconn.c:sms_router)
> 2007-06-17 21:40:10 [11275] [0] INFO:
> ----------------------------------------
> 2007-06-17 21:40:10 [11275] [0] INFO: Kannel bearerbox II version 1.4.1starting
> 2007-06-17 21:40:10 [11275] [0] INFO: MAIN: Start-up done, entering mainloop
> 2007-06-17 21:40:10 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: start called
> 2007-06-17 21:40:10 [11275] [6] DEBUG: Thread 6
> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 11275.
> 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: opening device
> 2007-06-17 21:40:10 [11275] [7] DEBUG: Thread 7
> (gw/bb_smscconn.c:sms_router) maps to pid 11275.
> 2007-06-17 21:40:10 [11275] [7] DEBUG: sms_router: time to sleep 30.00 secs.
> 2007-06-17 21:40:10 [11275] [7] DEBUG: sms_router: gwlist_len = 0
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: init device
> 2007-06-17 21:40:10 [11275] [6] INFO: AT2[/dev/ttyACM0]: speed set to 19200
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATZ
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:10 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CPIN?^M
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CPIN: READY
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0)
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> AT+CNMI=1,2,0,1,0^M
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR
> 2007-06-17 21:40:11 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Generic error:
> ERROR
> 2007-06-17 21:40:11 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Opening failed.
> Terminating
> 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device
> 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: opening device
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: device opened
> 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: init device
> 2007-06-17 21:40:11 [11275] [6] INFO: AT2[/dev/ttyACM0]: speed set to 19200
> 2007-06-17 21:40:11 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATZ^M
> 2007-06-17 21:40:14 [11275] [0] WARNING: Killing signal or HTTP admin
> command received, shutting down...
> 2007-06-17 21:40:14 [11275] [0] DEBUG: Shutting down Kannel...
> 2007-06-17 21:40:14 [11275] [0] DEBUG: shutting down smsc
> 2007-06-17 21:40:14 [11275] [0] DEBUG: AT2[/dev/ttyACM0]: Shutting down
> SMSCConn, slow
> 2007-06-17 21:40:14 [11275] [0] DEBUG: shutting down udp
> 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Wrong or no answer
> to ATZ, ignoring
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT&F^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- AT&F
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> ATE0^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ATE0
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+IFC=2,2^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CPIN?^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CPIN: READY
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGF=0^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0)
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- OK
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: -->
> AT+CNMI=1,2,0,1,0^M
> 2007-06-17 21:40:15 [11275] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR
> 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Generic error:
> ERROR
> 2007-06-17 21:40:15 [11275] [6] ERROR: AT2[/dev/ttyACM0]: Opening failed.
> Terminating
> 2007-06-17 21:40:15 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device
> 2007-06-17 21:40:15 [11275] [6] INFO: AT2[/dev/ttyACM0]: closing device
> 2007-06-17 21:40:15 [11275] [6] DEBUG: Thread 6
> (gw/smsc/smsc_at.c:at2_device_thread) terminates.
> 2007-06-17 21:40:15 [11275] [7] DEBUG: Thread 7
> (gw/bb_smscconn.c:sms_router) terminates.
> 2007-06-17 21:40:15 [11275] [4] DEBUG: Thread 4
> (gw/bb_boxc.c:sms_to_smsboxes) terminates.
> 2007-06-17 21:40:15 [11275] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run)
> terminates.
> 2007-06-17 21:40:15 [11275] [0] INFO: All flow threads have died, killing
> core
> 2007-06-17 21:40:15 [11275] [0] DEBUG: Waiting for 2
> (gwlib/http.c:server_thread) to terminate
> 2007-06-17 21:40:15 [11275] [3] DEBUG: HTTP: No clients with requests,
> quitting.
> 2007-06-17 21:40:15 [11275] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run)
> terminates.
> 2007-06-17 21:40:15 [11275] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread)
> terminates.
> 2007-06-17 21:40:16 [11275] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller)
> terminates.
> 2007-06-17 21:40:16 [11275] [0] INFO: Total WDP messages: received 0, sent 0
> 2007-06-17 21:40:16 [11275] [0] INFO: Total SMS messages: received 0, sent 0
> 2007-06-17 21:40:16 [11275] [0] DEBUG: Immutable octet strings: 210.